Showing posts with label portfolio. Show all posts
Showing posts with label portfolio. Show all posts

Sunday, 15 May 2011

Lettering In Engineering Drawing

[simpleaffiliate source="chitika" results="0"][/simpleaffiliate]
lettering in engineering drawing

Percy the Small Engine

Illustration controversy




Like Henry the Green Engine, Percy was the source of much friction between Rev. W. Awdry and C. Reginald Dalby, the illustrator of The Railway Series. Awdry complained that Percy did not look like a real locomotive, an issue that had caused contention between the two men on several occasions and concerning several characters. In the case of Percy, it was particularly infuriating, as Awdry had built a model of the engine in order that the artist could use it as a reference.




All this came to a head when the book Percy the Small Engine, centring on the eponymous character, was written. Awdry sent Dalby a letter requesting that he should make Percy look less like "a green caterpillar with red stripes". Insulted by this, Dalby resigned from the Railway Series.




Subsequent illustrators modified the design to make Percy look more like a typical industrial locomotive. The television series, however, utilised the original design.




The phrase "a green caterpillar with red stripes" resurfaces in the later story 'Woolly Bear', in which Thomas uses it as an insult to Percy and amends were made between Awdry and Dalby.




The Origins of Percy




In general outline, Percy is a fairly typical British industrial shunting locomotive. His bunker is quite unusual for an 0-4-0 shunter, but was presumably added to allow him to travel greater distances without refuelling than was previously possible. It is not known where Percy came from, but according to the book Troublesome Engines, he was bought at an "engine workshop" by the Fat Controller. Percy was needed to shunt the yard at the main station, as the tender engines (Gordon, Henry, James) had protested about having to shunt their own trains.




The Rev. W. Awdry considered it essential that his railway stories should be as realistic as possible. To this end, most of his locomotive characters were based upon real designs. However, Percy was designed before that policy came into effect. Percy's history within the fictional universe is largely unknown, as he does not precisely match any real locomotive design he is of "obscure antecedents", as the Rev. Awdry himself puts it. He does bear a resemblance to several designs of 0-4-0 tank locomotive built by the Avonside Engine Company such as GWR No. 1340 Trojan, and so Awdry stated that Percy had probably begun as one of these, but had been extensively rebuilt "fitters at Crovan's Gate have found components made by Hunslet and other manufacturers".




A mock-up "Percy" at a Day out with Thomas event on the Llangollen Railway




Percy as a model




Percy is an 0-4-0ST of unknown origin, but is almost certainly second hand. Percy arrived on Sodor in 1949 and was first used as Tidmouth Pilot, then to help rebuild Knapford Harbour. Percy is now based at Ffarquhar.




Percy arrived in "Troublesome Engines" (1949), the only loco whose acquisition from a workshop is actually described. His own book "Percy the Small Engine" dates from 1956. C. Reginald Dalby quit as illustrator after Awdry described his portrayal of Percy in "Percy the Small Engine" as a "caterpillar". Amends were made in "Tramway Engines" (1972) when Percy's accident with treacle and straw obligingly made him look like a real caterpillar. In the tale of how he came about, note that "the artist didn't pay much attention, so my Percy -- the proper one -- looks different from the Percy in the books"!! the Rev also describes his "Spare Percy" for use during emergencies:




"I built PERCY in 1949 (the year I wrote "Troublesome Engines" - the book in which Percy first appears), and I soldered him together out of brass and other parts cut and filed to shape. I wanted another engine - Thomas was then the only one I had - and I also wanted a model of Percy to help our then artist draw his pictures; but the artist didn't pay much attention, so my Percy -- the proper one -- looks different from the Percy in the books. Stewart Reidpath made a chassis for me and fitted it with one of his motors, so Percy is sometimes as temperamental as Thomas, and for the same reason. He will run and shunt beautifully for weeks on end and the suddenly, and for no apparent reason, decide to be 'Awkward'. This can be exasperating, especially at exhibitions. He did this at Nottingham Exhibition 1978, and the only thing to do then was to use my 'Spare Percy' which I had made for just such an emergency.




"To make 'Spare Percy' I cut out the boiler and side tanks from a Triang 'Nellie' and filled the resulting space between cap and smokebox with a section of saddletank cut from an Airfix kit. The outside cylinders came from another Airfix kit, and were cemented to 'Nellie's' metal frames with Evostick. I fitted scale wheels in place of 'Nellie's' rather clumsy ones, and filled up the body with plasticine. The good wheels and extra weight has made 'Spare Percy' into a smooth running engine almost as good as the real Percy in his best moments."




Meanwhile, Hornby's later 00 gauge Percy was made from a brand new tool after initial thoughts to use their Caledonian Railway "Pug" were rejected, although Percy eventually came to share many of its parts.




Percy in the television series




In the Thomas and Friends television series, Percy made his debut in the first season, in an episode called "Trouble in the Shed" which originally aired in 1984. His personality has been kept the same, up until about Season 8 when he became more curious about the world around; almost in resemblance to Sesame Street's Elmo. He particularly enjoys pulling the mail train.




Percy is voiced in the Japanese dub of Seasons 18 by Chisato Nakajima, his new voice in Season 9 is provided by Chie Koujiro.




Percy in Thomas and the Magic Railroad




Percy is first seen in the movie Thomas and the Magic Railroad when Henry reveals the legend of the lost engine; where he suggests that they start searching for her. He overhears Mr. Conductor talking in his sleep about magic buffers, he concludes that those buffers lead to the Magic Railroad. He tells Thomas, but is overheard by Diesel 10.




When the location of the buffers is located indirectly by Thomas, Percy is ordered to guard the buffers; he finds Splatter and Dodge later near the buffers, and warns Thomas and Mr. Conductor in time for them to help Lily Stone return to her grandfather.




Percy was voiced by Linda Ballantyne in the movie; Chisato Nakajima played him in the Japanese version.




References




^ a b The Rev. W., Awdry (1987). The Island of Sodor, its People, History, and Railways. Kaye & Ward. p. 132. ISBN 0 434 92762 7. 




External links




Percy the Small Engine Fan page




Martin Clutterbuck's page on the origins of Percy.




v  d  e




The Railway Series and Thomas and Friends




Engines




Thomas  Edward  Henry  Gordon  James  Percy  Toby  Duck  Donald and Douglas  Emily




Other characters




The Fat Controller  Annie and Clarabel  Bertie  Harold  Terence  Trevor




Railways




North Western  Skarloey  Arlesdale  Culdee Fell  Mid Sodor  Sodor & Mainland  The Other Railway




Places




The Island of Sodor  Locations in The Railway Series  Locations in Thomas and Friends




 




The Railway Series of books by the Rev. W. Awdry




 




List of Railway Series books  Major characters  Minor characters




Authors




Rev. W. V. Awdry (creator)  Christopher Awdry




Illustrators




William Middleton  Reginald Payne  C. Reginald Dalby  John T. Kenney  Peter and Gunvor Edwards  Clive Spong




Commercial




Merchandise  The Railway Stories (audiobooks)  (Audiobook narrators: Johnny Morris  Willie Rushton  Ted Robbins  Michael Angelis)




 




Thomas and Friends, the television show




Characters




Railway engines  Narrow gauge engines  Rolling stock  Vehicles  People and animals  Movie characters




Television series




1  2  3  4  5  6  7  8  9  10  11  12  13




Straight-to-video




On Site with Thomas  Engines and Escapades




Movies and specials




Thomas and the Magic Railroad  Calling All Engines  The Great Discovery  Hero of the Rails  Misty Island Rescue




Narrators




Ringo Starr  Michael Angelis  George Carlin  Alec Baldwin  Michael Brandon  Pierce Brosnan  All narrators




Production




Britt Allcroft (series creator)  David Mitton (original model director)  Gullane Entertainment  HiT Entertainment




Commercial




Day out with Thomas  Merchandise  Video game




Thomas Land at Drayton Manor  Percy's Railway (roller coaster)  Troublesome Trucks (roller coaster)




Related series




Shining Time Station   Robert D. Cardona Productions: TUGS  Theodore Tugboat




Categories: The Railway Series characters | Thomas the Tank Engine and Friends characters | Fictional locomotives | 1950 introductionsHidden categories: Articles lacking in-text citations from January 2010 | All articles lacking in-text citations


About the Author

I am an expert from China Hardware Suppliers, usually analyzes all kind of industries situation, such as designer accent pillows , silk filled pillow.



drafting related









[simpleaffiliate source="amazon" results="6"]lettering in engineering drawing[/simpleaffiliate]
[simpleaffiliate source="cj" results="2"]lettering in engineering drawing[/simpleaffiliate]
[simpleaffiliate source="clickbank" results="5"]lettering in engineering drawing[/simpleaffiliate]

Sunday, 21 November 2010

Engineering Drawing Lettering

[simpleaffiliate source="chitika" results="0"][/simpleaffiliate]
engineering drawing lettering

The 4 parts of a sales letter

Many people have problems to write sales letters that really make people buy what is on sale. Although it is impossible to guarantee that a sales letter will be successful, there are some things everyone can do to increase the chances that their sales letter turns into sales. The best way to help a sales letter to succeed is to focus on 4 main parts that each letter must include successful. The 4 parts of a sales letter is to draw the reader's attention, pique the reader's interest, give the reader want to buy what is selling and push the reader to act. Now see each of these parts.

Attracting attention

The first part of a sales letter should draw the attention of readers. If you can not grab their attention so they will pass your letter without reading a single word. So be sure to attract the attention of your readers at the beginning of your sales letter.

Pique the interest

The next part of a sales letter is to pique the interest of readers. Once you have attracted the attention of readers when you pique their interest. This will make them interested in what you sell and it will also continue to read.

Cause of desire

The third part of a sales letter is to cause desire. You want the reader to have what you want to sell. The best way to do this is by giving them what you want to sell on an emotional level.

Do act

The last part of a sales letter is a call to action. This is the part where you say to the reader to buy what you sell. When you do that you want to take away any fear of buying what you sell and you also want to give them a reason to buy immediately. This means that you want to create a sense of urgency. You must tell them why they should buy immediately.

The 4 parts of a sales letter is to attract attention, pique interest, the desire to provoke and push for action. If you do these 4 parts, so you'll always have the framework for a sales letter with great success.


About the Author

Daniel is an SEO content writer you can view more of his works at SEO and he enjoys his time developing forex trading systems and writing tutorials and articles about Forex and many other niches.



Simple techniques of design (17/19)









[simpleaffiliate source="amazon" results="6"]engineering drawing lettering[/simpleaffiliate]
[simpleaffiliate source="cj" results="2"]engineering drawing lettering[/simpleaffiliate]
[simpleaffiliate source="clickbank" results="5"]engineering drawing lettering[/simpleaffiliate]

Wednesday, 4 November 2009

Isometric Drawings

[simpleaffiliate source="chitika" results="0"][/simpleaffiliate]
isometric drawings
can anybody help me why plumbing drawings are not widely use isometric drawings like piping?



Plumbing is an old trade and has old ways. Relatively speaking, piping is a newer development and the newer technology uses a more universal type of drawing. Isometric drawings are not usually able to be read by plumbers any way. The only thing you really need to know about plumbing is 1) $#!t flows downhill and 2) pay day is Friday.


How to draw isometric drawings in AutoCAD 2010









[simpleaffiliate source="amazon" results="6"]isometric drawings[/simpleaffiliate]
[simpleaffiliate source="cj" results="2"]isometric drawings[/simpleaffiliate]
[simpleaffiliate source="clickbank" results="5"]isometric drawings[/simpleaffiliate]

Wednesday, 4 March 2009

Cad Designers

[simpleaffiliate source="chitika" results="0"][/simpleaffiliate]
cad designers

Benefits of Outsourcing CAD Design Services

Computer Aided Design - CAD is used in creating, drafting, and construction plus automated documentation and 3D models. Automatic design systems generally used for designing of devices as well as all kinds of mechanical engineering and buildings.




Computer Aided Design is used in various areas such as building, architecture, mechanical, electro technical, aviation, and motor-car industry.




Nearly by the end of 60th decade of the last century CAD application in the industry Increased, this gradually strengthened with the emergence of personal computers. Initially it was used for 2D modeling, later for 3D modeling and design attained increasingly popular.




Automated design industry is simply too wide. Selecting appropriate CAD 2D design services and CAD 3D design services for CAD system is a reliable method of efficient design. Following are the criteria of selecting the right system:




•Recognition of Computer Aided Design or CAD design




•Cost of CAD systems, maintaining it as well as revising it




•User-friendliness and expediency working with CAD




•Simplicity and capabilities of integration with other CAD systems




•Approximate width of the design projects




•A horizontal library support for customary solutions is available




•Team work capabilities




Since last few years it is a general practice that design services are taken to outsourcing CAD design services. Main reason of this is that CAD 2D design services and CAD 3D design services cut down on cost by outsourcing these projects to proficient work force.




Reliable outsourcing CAD design services can help you cut down on cost providing superior performance, and to get a well managed e-business infrastructure. It further helps in being more competitive as well as provides security. These days more business personnel opt for outsourcing CAD design services because here the business owner gets increases profits cutting down on costs as he does not require to invest on technical equipments, relevant paid software, and office space.




About the Author

Hi-Tech CADD Services would be more than happier to help you fulfill your CAD design requirements. Visit our site to know who we are: http://www.hitechcaddservices.com or E-mail us your requirements at: info@hitechcaddservices.com




 



St. Scholastica's College Manila - Interior Design AutoCad Furniture Exhibit Project









[simpleaffiliate source="amazon" results="6"]cad designers[/simpleaffiliate]
[simpleaffiliate source="cj" results="2"]cad designers[/simpleaffiliate]
[simpleaffiliate source="clickbank" results="5"]cad designers[/simpleaffiliate]